IBM RS/6000 manual Runtime Phase

The SP can dial a pre-programmed telephone number in the event of failure. The SP issues an error report with the last reported I and any other available error information.

ŸUpdate Operator Panel

The SP displays Operator Panel data on the ASCII terminal if a nection is active.

ŸEnvironmental Monitoring

Environmental Monitoring is now controlled by the SP instead of the system, with expanded error recording and reporting.

ŸSystem Firmware Surveillance (Heartbeat Monitoring)

The SP will monitor and time the interval between system firmware

ŸResponding to System Processor Commands

The SP will respond to any command issued by the system processo

Runtime Phase

This	phase includes the tasks that the SP performs during steady-st
the	operating system.

ŸEnvironmental Monitoring

The SP monitors voltages, temperatures and fan speeds (on some se

ŸResponding to System Processor Commands

The SP will respond to any command issued by the system processo

ŸRun-Time Surveillance (Heartbeat Monitoring)

If	the device driver		is	installed and surveillance	enabled, the
system		heartbeat. If	the	heartbeat times out, the	SP places a
This	is	different from	the Bringup Phase scenario where two re
made	before placing an		outgoing call.

Appendix D. Service Processor OperationalD-3Phases