IBM RS/6000 manual Emergency Eject

Emergency Eject

Note: Execute the following procedure only in an emergency (tray wi although pressing the unload button).

1.Insert a small diameter rod, such as a straightened paper cli gency eject hole. (Refer to the illustration below for the loc eject hole.)

2. Push the tool in until you feel resistance.

3.	Maintain		a small	amount of	pressure	on the rod while pulling on th
your		fingernail.
4.	Pull	the	tray	open and remove the		disc.
		Head Phone		Tray Opening	Emergency
		Jack			Eject Access

	Volume Control	Status Light	Load/Unload
			Button
Note:	Normally the tray	makes a ratcheting	sound when pulling it open
above	procedure.

Chapter 2. Using the System2-15Unit