IBM RS/6000 manual Loading the Diagnostics

Step 2. Loading the Diagnostics

1. Stop all application programs running on the operating system.

2.Stop the operating system.

3.Turn the power off.

4.If you are loading the Standalone Diagnostics and running them from an terminal:

ŸThe attributes for the terminal must be set to match the defaults nostics.

Ÿ If	you need to change any			settings, record		the	normal settings,	an
the	terminal	attributes	are	set	to work with	the	diagnostics. If	n
“Running the		Diagnostics	from	a TTY	Terminal” on	page 6-3.

Ÿ Return to substep 5 when you finish checking the attributes.

5. Turn the power on.

a. When the keyboard indicator appears, press					F5 on the direct attac
board (5	on the ASCII keyboard)	to	load	the	Standalone Diagnostics
on the directly-attached keyboard		(6	on	the	ASCII terminal keyboard
the Online	Diagnostics.

b. Enter requested passwords.

c. Follow any instructions to select a console.

6. When	the	Diagnostic	Operating Instructions display, go to Step 3. If
unable	to	load the	diagnostics, go to “Problem Determination When Unable
Load	Diagnostics” on		page 9-10.

8-2RS/6000 Enterprise Server Model H Series User's Guide