IBM RS/6000 manual Standby Phase, Bring-Up Phase, Lcd

Standby Phase

The

standby

phase

can

be

reached

in two

ways:

1. With

the

server

OFF

and

power

connected (the

normal

path),OK in

recognized

the

LCD

display

2. With

the

server

ON

after

an

operating

system STBYfault,or

recognizedan by

8-digit code in

the

LCD

display

In

the

Standby phase,

the

SP

takes

care

of some automatic duties and i

for

menus

operation.

The

SP

remains

in

the

standby

phase

until

a power-on

is

detected.

The Standby phase components are:

ŸModem Configuration

SP	will configure	the	modem	(if installed) so that incoming calls may be
or	outgoing calls	may	be	placed.

ŸDial In

Monitor incoming phone line to answer calls, prompt for a password, verify password and remotely display the standby menu. The remote session can mirrored on the local ASCII console if the server is so equipped and enables this function.

Ÿ Menus
The	SP	menus are password protected. Before you can access them you
to	know	either the General User (Power-On Password or POP) or the Privi
User		(Privileged Access Password or PAP).

Bring-Up Phase

This phase is entered upon power-on, and exited upon loading of the oper system.

The Bring-up phase components are:

ŸRetry Request Check

The SP will check to see			if	the previous IPL attempt failed. If two
fails	are	detected, the	SP	displays	an error code	and	places an out
notify	an	external party	if	the user	has enabled	this	option.

ŸDial Out

D-2RS/6000 Enterprise Server Model H Series User's Guide