IBM RS/6000 manual Obvious, Display, Following steps to Shut, Did

Step 5

This step invokes the Online Diagnostics in concurrent mode.

1. Log on rootas or superuseras .

2. Enter thediag command.

3.Wait until the Diagnostic Operating Instructions are displayed, minutes.

Are the	Diagnostic Operating Instructions displayed		without	any	obvious
console	display	problems?
NO	Do	the following steps to	shut	down	the system:

1.At the system prompt, stop the operating system using t command for your operating system.

	2.	After		the	operating system is stopped, power off the
	3.	Go	to	“Step	6.”
YES	Go	to	“Step 9.”

Step 6

This step loads Online Diagnostics in service mode. If you are una diagnostics, go to “Step 7.”

1.Turn the power on.

2.When the keyboard indicator (icon or text) appears, press F6

attached	keyboard or 6 on the ASCII terminal keyboard to indic
tics are	to be loaded.

3. Enter requested passwords.

4. Follow instructions to select a console.

Did the	Diagnostics		Operating	Instructions display without any obvious display
problem?
NO	Go	to	“Step	7.”
YES	Go	to	“Step	9.”

Chapter 9. Hardware Problem Determination9-3