IBM RS/6000 manual Did the diagnostics load?, NOGo to Step YES Go to Step

Step 3

This step attempts to load Online Diagnostics in service mode.

1.Turn the power to off.

2.Turn the power on.

3. If the keyboard indicator appears, press F6 on the direct at on the ASCII keyboard to indicate that diagnostics are to be

4. Enter requested passwords.

5. Follow instructions to select a console.

6. Wait until the diagnostics load or the system appears to stop.

Did the diagnostics load?

NOGo to “Step 5.”

YES Go to “Step 6.”

Step 4

This step attempts to load the Standalone diagnostics.

1.Turn the power to off.

2.Turn the power to on.

3. Insert the diagnostic CD-ROM into the CD-ROM drive.

4. If the keyboard indicator appears, press F5 on the direct at on the ASCII keyboard to indicate that diagnostics are to be

5. Enter requested passwords.

6. Follow instructions to select a console.

7. Wait until the diagnostics load or the system appears to stop.

Did the diagnostics load?

NOGo to “Step 5.”

YES Go to “Step 6.”

Chapter 9. Hardware Problem Determination9-11