IBM RS/6000 manual Phases, Appendix D. Service, Pre-Standby Phase, SP Post

Appendix D. Service		Processor	Operational		Phases
This section	provides a		high-level		flow of the phases of the Servi
		SP Power		Applied
			+
			6
*333330		Pre-Standby Phase
+	6		+
+			6
+	Standby Phase			SP Menus Available
+			+
+			6
+	Bring-Up Phase			SMS Menus Available
+			+
+			6

+Runtime Phase Diagnostic Service Aids Available

++

,3333333333333333332

Pre-Standby Phase

This	phase	is	entered when	the server	is connected to a power s
may	or may	not	be fully powered on. This phase is exited when th
Tests (POSTS)		and	configurations	tasks are	completed.

The Pre-Standby phase components are:

ŸSP Initialization

SP performs any necessary hardware and software initializations.

ŸSP POST

SP conducts Power-On Self Tests on its various work and code area

ŸSP Unattended Start Mode Checks

If unattended		start mode		is set, the SP automatically			reboots
fault recovery. SP will not				wait for a user-input or		power-on comm
move	straight through		the	phase and into	the Bringup	Phase. The
start	mode can	be	reset	by accessing	SMS menus, or	SP	menus.

Appendix D. Service Processor OperationalD-1Phases