Canon 60D instruction manual Error Codes, 291

Error Codes

Error No. If there is a problem with the camera, an error message will appear. Follow the on- screen instructions.

Countermeasures
No.		Error Message & Solution
	Communications between the camera and lens is faulty. Clean the
01	lens contacts.
	ÎClean the electrical contacts on the camera and lens and use a
	Canon lens (p.13, 16).
	Card cannot be accessed. Reinsert/change card or format card
02	with camera.
	ÎRemove and insert the card again, replace the card, or format the
	card (p.32, 48).
	Cannot save images because card is full. Replace card.
04
	ÎReplace the card, erase unnecessary images, or format the card
	(p.32, 48, 215).
	The built-in flash could not be raised. Turn the camera off and on
05	again.
	ÎOperate the power switch (p.28).
06	Sensor cleaning is not possible. Turn the camera off and on again.
	ÎOperate the power switch (p.28).
10, 20,	Shooting is not possible due to an error. Turn the camera off and
30, 40,	on again or re-install the battery.
50, 60,	ÎOperate the power switch, remove and install the battery pack
70, 80	again, or use a Canon lens (p.26, 28).

*If the error still persists, write down the error No. and contact your nearest Canon Service Center.

291