Canon 60D instruction manual Set the desired flash ratio and shoot, 142

Using Wireless FlashN

Fully-automatic Shooting with One External Speedlite and Built-in Flash

This shows fully-automatic wireless flash shooting with one external Speedlite and the built-in flash.

You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows look on the subject.

1 Select [Wireless func.].

Follow step 5 on page 141 to select [0:3] for [Wireless func.], then press <0>.

2 Set the desired flash ratio and shoot.

Select [1:2] and set the flash ratio within 8:1 to 1:1. Setting a flash ratio to the right of 1:1 (up to 1:8) is not possible.

If the built-in flash output is not enough, set a higher ISO speed (p.88).

The 8:1 to 1:1 flash ratio is equivalent to 3:1 to 1:1 stops (1/2-stop increments).

142