Canon 60D Fully Automatic Shooting with One External Speedlite, Select Flash mode, 140

Using Wireless FlashN

Fully Automatic Shooting with One External Speedlite

This shows the most basic setup for fully-automatic wireless flash with one Speedlite.

Steps 1 to 3 and 6 to 7 apply to all wireless flash shooting. Therefore, these steps are omitted in the other wireless flash setups explained on the pages hereafter.

On the menu screens, the <0> and <1> icons refer to the external Speedlite, and the <3> and <2> icons refer to the built-in flash.

1 Press the <I> button to pop-up the built-in flash.

For wireless flash, be sure to pop-up the built-in flash.

2 Select [Flash control].

Under the [1] tab, select [Flash control], then press <0>.

3 Select [Built-in flash func. setting].

Select [Built-in flash func. setting], then press <0>.

4 Select [Flash mode].

For [Flash mode], select [E-TTL II], then press <0>.

140