Canon 60D instruction manual Select Wireless func, Set Channel, Select Firing group, 141

Using Wireless FlashN

5 Select [Wireless func.].

For [Wireless func.], select [0], then press <0>.

XUnder [Wireless func.], [Channel], etc., will be displayed.

6

7

8

Set [Channel].

Set the channel (1-4) to the same one as the slave unit.

Select [Firing group].

For [Firing group], select [1All], then press <0>.

Take the picture.

As with normal flash shooting, you can set the camera and take the picture in the same way.

To terminate wireless flash shooting, set [Wireless func.] to [Disable].

Setting [E-TTL II meter.] to [Evaluative] is recommended.

Even if you disable the built-in flash from firing, it will still fire to control the slave unit.

The slave unit cannot fire a test flash.

141