Canon 60D instruction manual AFE LockN, Press the D button to pop-up the built-in flash, 134

DUsing the Built-in Flash

AFE LockN

FE (flash exposure) lock obtains and locks the standard flash exposure reading for any part of a subject.

1 Press the <D> button to pop-up the built-in flash.

Press the shutter button halfway and look in the viewfinder to check that the <D> icon is lit.

2

3

Focus the subject.

Press the <A> button. (8)

Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the <A> button.

XThe flash will fire a preflash and the required flash output is calculated and retained in memory.

XIn the viewfinder, “FEL” is displayed for a moment and <d> will light. Each time you press the <A> button, a preflash is fired and the required flash output is calculated and retained in memory.

4 Take the picture.

Compose the shot and press the shutter button completely.

XThe flash is fired when the picture is taken.

If the subject is too far away and beyond the effective range of the flash, the <D> icon will blink. Get closer to the subject and repeat steps 2 to 4.

134