Canon 60D Labeling the Serial No. on the Battery, Write the serial No. on a label, 270

3Checking the Battery Information

Labeling the Serial No. on the Battery

Affixing a serial No. label onto all the registered Battery Pack LP-E6’s makes it convenient.

Serial No.	1	Write the serial No. on a label.
		Write the serial No. displayed on the
		battery history screen on a label
		approx. 25 mm x 15 mm / 1.0 in. x 0.6
		in. in size.

2 Take out the battery and affix the label.

Set the power switch to <2>. Open the battery compartment cover and remove the battery.

Affix the label as shown (side with no electrical contacts) in the illustration.

Repeat this procedure for all of your battery packs so you can easily see the serial No.

Do not affix the label on any part other than as shown in the illustration in step 2. Otherwise, the misplaced label might make it difficult to insert the battery or impossible to turn on the camera.

If you use Battery Grip BG-E9, the label might peel off as you repeatedly load and remove the battery pack. If it peels off, affix a new label.

270