Canon 60D instruction manual 3Custom Function SettingsN, Fn I Exposure, 252

3Custom Function SettingsN

C.Fn I: Exposure

C.Fn I -1 Exposure level increments

0:1/3-stop

1:1/2-stop

Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.

With setting 1, the exposure level will be displayed in the viewfinder and on the LCD panel as shown below.

C.Fn I -2 ISO speed setting increments

0:1/3-stop

1:1-stop

C.Fn I -3 ISO expansion

0:Off

1:On

For the ISO speed, “H” (equivalent to ISO 12800) will be selectable. Note that if [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], “H” (equivalent to ISO 12800) cannot be set.

C.Fn I -4 Bracketing auto cancel

0:On

The AEB and WB-BKT settings will be canceled if you set the power switch to <2> or clear the camera settings. AEB will also be canceled when the flash is ready to fire or if you switch to the movie mode.

1:Off

The AEB and WB-BKT settings will not be canceled even if you set the power switch to <2>. (If the flash is ready to fire, AEB will be canceled temporarily, but the AEB amount will be retained.)

252