Canon 60D 3Manual Sensor CleaningN, Select Sensor cleaning, Select Clean manually, 233

3Manual Sensor CleaningN

Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.

The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended.

Before cleaning the sensor, detach the lens from the camera.

1

2

3

Select [Sensor cleaning].

Under the [6] tab, select [Sensor cleaning], then press <0>.

Select [Clean manually].

Select [Clean manually], then press <0>.

Select [OK].

Select [OK], then press <0>.

XIn a moment, the reflex mirror will lockup and the shutter will open. “CLn” will blink on the LCD panel.

4 End the cleaning.

Set the power switch to <2>.

As power source, using the AC Adapter Kit ACK-E6 (sold separately) is recommended.

If you use a battery, make sure it is fully recharged. If the battery grip with size-AA/LR6 batteries is attached, manual sensor cleaning will not be possible.

233