Canon 60D instruction manual 3Auto Lighting OptimizerN, Set the correction setting, 101

3Auto Lighting OptimizerN

If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. The default setting is [Standard]. With JPEG images, the correction is done when the image is captured.

1 Select [Auto Lighting Optimizer]. Under the [2] tab, select [Auto Lighting Optimizer], then press <0>.

2 Set the correction setting.

Select the desired setting, then press <0>.

3 Take the picture.

The image will be recorded with the brightness and contrast corrected if necessary.

Without correction With correction

If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the Auto Lighting Optimizer will be set automatically to [Disable] and you cannot change this setting.

Depending on the shooting conditions, noise might increase. If a setting other than [Disable] is set and you use exposure compensation, flash exposure compensation, or manual exposure to darken the exposure, the image might still come out bright. If you want a darker exposure, set this to [Disable] first.

In Basic Zone modes, [Standard] is set automatically.

101