Canon 60D 3Lens Peripheral Illumination Correction, Select Peripheral illumin. correct, 102

3Lens Peripheral Illumination Correction

Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. The default setting is [Enable].

1 Select [Peripheral illumin. correct.].

Under the [1] tab, select

[Peripheral illumin. correct.], then press <0>.

2 Set the correction setting. On the screen, check that the attached lens’ [Correction data available] is displayed.

If [Correction data not available] is displayed, see “About the Lens Correction Data” on the next page. Select [Enable], then press <0>.

3 Take the picture.

The image will be recorded with the corrected peripheral illumination.

Without correction With correction

102