Installing and Removing the SD Card

The camera is compatible with SD, SDHC, and SDXC memory cards. The captured images are recorded onto the card (sold separately).

Make sure the card’s write-protect switch is set upward to enable writing/erasing.

Installing the Card

1 Open the cover.

Slide the cover as shown by the arrows to open it.

Write-protect switch

2

3

Possible shots

Insert the card.

As shown by the illustration, face the top of the card toward you. Insert the card straight in all the way.

Close the cover.

Close the cover and slide it in the direction shown by the arrows until it snaps shut.

When you set the power switch to

<1>, the access lamp will blink and the number of possible shots will be displayed on the LCD panel.

The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc.

Setting the [1Release shutter without card] menu option to [Disable] will prevent you from forgetting to install a card (p.278).

32

Page 32
Image 32
Canon 60D instruction manual Installing and Removing the SD Card, Installing the Card Open the cover, Insert the card