Lenovo RD230 Removing or installing the power supply, Seven ports that secure the system fans

4.Carefully put the system fans into the server. Mind the seven ports 1 that secure the system fans. Align the holes in the system fans with the corresponding ports on the server.

Figure 39. The seven ports that secure the system fans

5.Connect the system fan cables to the corresponding connectors on the system board in the numerical order following the illustration below.

Figure 40. Connecting the system fan cables to the connectors on the system board

6.To complete the installation, go to “Completing the parts replacement” on page 87.

Removing or installing the power supply

This section provides instructions on how to remove or install the power supply.

Chapter 5. Installing, removing, or replacing hardware 77