Lenovo RD230 manual Sub-item Option Description, PEF Support

Table 27. Submenus under the IPMI 2.0 Configuration

Item	Sub-item			Option		Description
View BMC System						View the system
Event Log						event log.
Clear BMC System						Delete the system
Event Log						event log.
Set LAN						Set the IP address
Configuration						source, IP address,
						subnet mask, and
						gateway address.
Set PEF	PEF SUPPORT			Disabled		Enable or disable the
Configuration				[Enabled]		PEF support.
BMC Watch Dog				[Disabled]		Disable or enable the
Timer Action				Reset System		OS based dongle. If
				Power Down		enabled, whenever
				Power Cycle		any problems arising
						from the operation
						system, such as the
						system halted, the
						system management
						feature will take
						actions of Reset
						System, Power
						Down, or Power
						Cycle at the prompt
						of the dongle Timer.
BMC Alert LED and				[Off]		Turn on or turn off
Beep				On		the BMC alert LED
						and beep.
FW key				[0000000]
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 28. Submenu under the Intel VT-d Configuration
Item			Option			Description
Intel VT-d		Disabled			Enable or disable the
		[Enabled]			virtualization technology for
					I/O devices.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 29. Submenus under the Remote Access Configuration
Item			Option			Description
Remote Access		[Disabled]			Enable or disable the serial
		Enabled			port remote access.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 30. Items under the PCIPnP menu
Item			Option			Description
Clear NVRAM		[No]			If this option is set to Yes,
		Yes			that means to clear the
					NVRAM information when
					the system starts up.

Chapter 7. Configuring the server 109