Lanier AP206 manual Duplex Print, Duplex Bind, O Timeout, Feed Timeout, Print Errors, KTalk Mode

Menu Settings

❖9.Duplex Print

You can select whether to use duplex printing or not.

•Off

•On

❖A.Duplex Bind

You can select the binding position of duplex prints.

•Long Edge

•Short Edge

❖C.Job Timeout

You can set how many seconds the printer waits before terminating a print job when the printer does not receive the end of the current print job. The job is automatically cancelled if time runs out.

•000 Off

•1 to 999 seconds by 1

❖ D.I/O Timeout

5

You can set how many seconds the printer waits for more print data before ending its wait period and terminating a job. The job is automatically can- celled if no data is received for the selected time.

• 000 Off

• 1 to 999 seconds by 1 (300 seconds)

❖ E.Feed Timeout

You can set how many seconds the printer waits for the correct paper size loaded, when paper runs out while printing. The job is printed with the paper currently loaded if the correct size is not loaded within the selected time.

• 000 Off

• 1 to 999 seconds by 1 (60 seconds)

❖ F.Print Errors

You can select if an error report will be printed from the current tray when a PostScript error occurs while printing.

• Off

No error report is printed when an error occurs.

• On

An error report is printed when an error occurs. Some of the VM area is used when this feature is on.

❖ G.KTalk Mode

This setting is not available.

89