Lanier AP206 manual Macintosh

	Printer Does Not Print
Possible cause	Solutions
If you print using the	❖ Windows 95/98/Me
RICOH-SCRIPT2 printer	Set a longer [Job timeout:] period with the [PostScript] tab of the
driver, printing does not	Printer Properties.
start or is interrupted.
	❖ Windows 2000
	Set a longer [Job Timeout:] period with the [Device Settings] tab
	of the Printer Properties.
	❖ Windows NT 4.0
	Set a longer [Job Timeout:] period with the [Device Settings] tab
	of the Printer Properties.
	❖ Macintosh
	Set a longer [Job Timeout] period.

A PostScript error might occur if there is not enough memory in the machine, or there are errors in the print data sent to the ma- chine.

•Print the configuration page to check the amount of available memory.

•If the memory size is full, increasing the memory may solve this problem. If you still cannot clear the problem, contact your sales or service representative.

The print job might be reset. Do the following.

•Confirm that you have selected the correct printer driver. Try printing again.

•Set a longer Wait Timeout.

❖Windows 95/98/Me

Set a longer [Wait timeout:] period with the [PostScript] tab of the Printer Properties.

❖Windows 2000

Set a longer [Wait Timeout:] period with the [Device Settings] tab of the Printer Properties.

❖Windows NT 4.0

Set a longer [Wait Timeout:] period with the [Device Settings] tab of the Printer Properties.

❖Macintosh

You can specify a longer "I/O Timeout" period on the oper- ation panel. ⇒ P.79 “Using the Operation Panel”

4

47