Lanier AP206 manual Deleting the User Code Record, Log Protect j Offl

Using the Operation Panel

E Press {T} or {U} to select “On” or “Off”, and then press {#Enter}.

<Log Protect> j

Offl

This registers the setting and returns to the “Maintenance” menu.

F Press {On Line}.

The "Ready" message appears on the panel display.

Deleting the User Code Record

This procedure describes how to clear the User Code record.

Note

❒If “Log Protect" is set to "On", you can not delete the User Code record. Select

5	"Off" in “Log Protect", and then follow the procedure below. ⇒ P.105 “Protect-
	ing the User Code Record”

A Check if the On Line indicator stays on. If not, press {On Line}. B Press {Menu}.

Power	On Line	Data In
		Reset

Error

Menu Escape

Media Enter

ZDHS031E

The following message appears on the panel display.

<Menu>	j
IPDL-C Menu	l

C Press {T} or {U} to display "Maintenance", and then press {#Enter}.

106

<Menu> j

Maintenance l

The following message appears on the panel display.

<Maintenance> j 1.Toner Level l