Lanier AP206 manual Maintenance j 4.Registrationl, Registration Tray2Horiz, Tray2Horiz Jl/#0

Cleaning and Adjusting the Printer

I Press {T} or {U} to display "4.Registration", and then press {#Enter}.

N Press {On Line}.

The “Ready” message appears on the panel display.

<Maintenance> j 4.Registrationl

The following message appears on the panel display.

	<Registration>	j
	Tray2:Horiz.	l
J Press {T} or {U} to display the
			4
	name of the tray whose margins

you want to match, and then press {#Enter}.

The following message appears on the panel display.

<Tray2:Horiz.>

jl/#0

K Press {U} or {T} to match the margins, and then press {#Enter}.

When the value is increased by one, the image moves 0.5mm to the right.

Note

❒The setting can be changed from -7 to 7.

L Press {#Enter}.

<Config.Page>

Press # key

This prints the configuration page with the new setting and returns to the “Registration” menu.

M Confirm of the registration. If you want to change the setting, press {#Enter} and repeat stepsK and L. If you want to finish, go to step N.

65