Lanier AP206 manual Macintosh - Setting Up for Printing, Making paper settings from an application

Setting Up the Printer Driver and Canceling a Print Job

Macintosh - Setting Up for Printing

	Making paper settings from an application
1
	A Open the file you want to print.
	B On the [File] menu, click [Page Setup].

[LaserWriter 8 Page Setup] appears.

C Confirm that the printer you want to use is shown in the [Format for:] box.

Note

❒If the printer is now shown in the [Format for:] box, use the pop-up menu to display a list of available printers.

Reference

The actual appearance of the Page Setup depends on the application you are using. For more information, see the documentation that comes with the Macintosh.

D From the [Paper:] box, select the paper size.

E Make desired settings, and then click [OK].

-Small Size Print Area

This printer supports printing on print areas such as “A4 Small” and “Letter Small” when printing from a Macintosh only with specific versions of the driver. The LaserWriter 8.4x (or later) driver supports printing on both standard and small print areas. However, with LaserWriter 8.3x (or earlier), the small print area options are not displayed.

With LaserWriter 8.3x (or earlier), select A4, for example, and click [Options] in the [Page Setup] dialog box, then use the [Larger Print Area] option. Checking [Larg- er Print Area] produces the same printing result as LaserWriter 8.4x (or later) stan- dard A4 print area. Unchecking the [Larger Print Area] produces the same result as the LaserWriter 8.4x (or later) “A4 Small” print area.

Setting up for printing from an application

A Open the file you want to print.

B On the [File] menu, click [Print].

The Printer Settings appear.

12