Lanier AP206 manual Loading Paper in the Paper Tray

Loading Paper

Loading Paper

Loading Paper in the Paper Tray

This section describes instructions for loading paper in the standard paper tray and the Paper Cassette Type204 (option).

RCAUTION:

•The paper tray does not have a stopper. When pulling it out, be careful not to pull it strongly. If you do, the tray might fall and cause a personal injury.

Reference

For more information about the size and feed direction of paper that can be loaded in the tray, see P.21 “Paper and Other Media Sup- ported by This Printer”.

B Slide the paper guides to posi- tions that match the size of paper you want to load.

3

ZDGY020J

ZDGY030J

Note

❒Custom size paper is supported by the standard tray or the Paper Cas- sette Type204 (option) only. (Both are referred to as Tray 1.)

A Carefully pull the paper tray out of the printer and place it on a flat surface.

ZDGY010J

C Load paper into the tray with the side to be printed facing up.

ZDGY040J

Important

❒Confirm that the top of the stack is not higher than the limit mark (T) inside the tray.

29