Lanier AP206 Printer Does Not Print, Windows 95/98/Me, Windows NT, Possible cause, Solutions

Troubleshooting

Printer Does Not Print

	Possible cause	Solutions
	Is the power on?	If not, confirm that the power cord is securely plugged into the
		power outlet and the printer.
		Turn on the printer. ⇒ the "Setup Guide" that comes with the
		printer
	Does the On Line indica-	If not, press {On Line} to make it light up.
	tor stay on?
	Does the Error indicator	If so, check the error message on the panel display and take the re-
	stay red?	quired action. ⇒ P.36 “Error & Status Messages on the Operation
		Panel”
4	Is the paper loaded?	Load paper into the paper tray. ⇒ P.29 “Loading Paper”
	Is the interface cable be-	Connect the interface cable properly. If there are any connectors or
	tween the printer and the	screws, confirm that they are fastened securely.
	computer connected se-	For more information about the settings, see the "Quick Installa-
	curely?
		tion Guide".
	Are you using a correct in-	The type of interface cable you should use depends on the com-
	terface cable?	puter. Be sure to use the correct one.
		If the cable is damaged or worn, replace it with a new one.
		For more information about the settings, see the "Quick Installa-
		tion Guide".
	Did you connect the inter-	Connect the interface cable before turning on the power switch.
	face cable after turning on
	the power switch?
	When you print using the	❖ Windows 95/98/Me
	RICOH-SCRIPT2 printer	On the [PostScript] tab of the Printer Properties, click [Advanced]
	driver in a network, data is	and then clear both [Send CTRL+D before job] and [Send CTRL+D
	received by the printer, but	after job].
	is not printed.
		❖ Windows 2000
		On the [Device Settings] tab of the Printer Properties, select [No]
		for both [Send CTRL-D Before Each Job:] and [Send CTRL-D After
		Each Job:].
		❖ Windows NT 4.0
		Open the [Advanced] tab of the Printer Properties. From [Post-
		Script Options], select [No] for both [Send CTRL-D Before Each job:]
		and [Send CTRL-D After Each job:].

46