Lanier AP206 manual Toner Level ⇒ P.63 Adjusting the Image Density, ⇒ P.93 Maintenance Menu

			Menu Table
Maintenance	1. Toner Level ⇒ P.63 “Adjusting the Image Density”
	2.	Reinstall⇒ P.68 “Replacing the Photoconductor Unit”
	3.	Menu Reset ⇒ P.100 “Resetting Menus”
	4.	Registration ⇒ P.64 “Adjusting the Setting of Registration of the Pa-
	per Tray”
	5.	Menu Protect *2 ⇒ P.81 “Protecting the Menus”
	6.	Log Protect *2 ⇒ P.105 “Protecting the User Code Record”
	7.	Log Clear *3	⇒ P.106 “Deleting the User Code Record”
	8.Ethernet *2 *4		⇒ P.93 “Maintenance Menu”
	9.	Prt.Priority ⇒ P.93 “Maintenance Menu”
List Print	1. Config.Page ⇒ P.95 “Printing the Configuration Page”
	2.	Color Sample ⇒ P.98 “Printing the Color Sample”
	3.	Job Log
	4.	Statistics
Select PDL

*1

*2

*3

*4

The setting is not effective.

This menu appears when {#Enter}, {Escape} and {Menu} are pressed while the printer 5 is online.

If “Log Protect” is set to “On”, this menu will not appear.

Available only when the optional Network Interface Board is installed in the printer.

85