Lanier AP206 manual System Menu, Parallel if, Paper Tray, O Buffer, Energy Level

Using the Operation Panel

❖H.Parallel IF

You can select the parallel interface timing. When “SystemDefault” is select- ed, the setting in the “System Menu” is used.

•SystemDefault

•ACK Inside

•ACK Outside

System Menu

The following are the settings you can make with the “System Menu”.

Note

❒Italicized settings indicate default settings.

❖1. Paper Tray

5	You can select the default paper tray that is selected whenever you turn on
	the printer.

•Tray 1

•Tray 2 (option)

Note

❒If [Auto Tray Select] is selected on the printer driver, printing starts with the tray specified here. If the specified type of paper is not set in the tray, then the paper will be fed from the other tray.

❖2. I/O Buffer

You can select the size of the I/O buffer. Normally it is not necessary to change this setting.

• 16KB

• 32KB

• 64KB

• 128KB

• 256KB

• 512KB

• 1024KB

• 2048KB

❖3. Energy Level

You can select the Energy Saver mode level. “Level 1” is the default setting and saves more power consumption than ”Level 2”.

When you select “Off”, the printer will never enter the Energy Saver mode.

• Level 1

• Level 2

• Off

90