Lanier AP206 manual When the Message Remove Misfeed From Output Tray Appears

Removing Misfed Paper

D Push the pressure release levers as illustrated to release the pres- sure between the rollers.

ZDGY120J

E Carefully pull the misfed paper from the rear cover side.

ZDGY111J

F Return the pressure release levers to their original positions.

G Close the top cover and rear cover, and press the center of the top cover until it locks securely into place.

Note

❒If the printer is equipped with the paper feed unit (optional) and the duplex unit (optional), close the paper guide unit, cov- er and upper portion of the du- plex unit.

When the Message "Remove

Misfeed From Output Tray"

Appears

Important

❒Toner printed on misfed paper is not fused and can make your hands or clothing dirty. Take care to avoid contact with the toner as you remove misfed paper.

A Open the rear cover of the printer.

Note 4

❒If the printer is equipped with the paper feed unit (optional) and the duplex unit (optional), first open the cover of the du- plex unit (a), then open the pa- per guide unit inside the duplex unit (b), and finally open the rear cover of the printer (c).

(c)

(b)

(a)

ZDGY130J

57