Lanier AP206 manual Menu Settings, IPDL-C Menu, RPS2 Menu

Using the Operation Panel

Menu Settings

IPDL-C Menu

The following are the settings you can make with “IPDL-C Menu”.

Note

❒Italicized settings indicate default settings.

❖1. Job Timeout

You can set how many seconds the printer waits before terminating a print job when the printer does not receive the end of the print job. Setting “000 Off” turns off job timeout.

•000 Off

•1 to 999 seconds by 1

5 ❖ 2. I/O Timeout

You can set how many seconds the printer waits for more print data before ending its waiting period and terminating a job. Setting “000 Off” turns off I/ O timeout.

•000 Off

•1 to 999 seconds by 1 (999 seconds)

RPS2 Menu

The following are the settings you can make with “RPS2 Menu”. The settings made with the printer driver normally take priority, except when a printer driv- er setting is set to use the printer's settings.

Note

❒Italicized settings indicate default settings.

❖ 1.Resolution

You can select the resolution and the number of colors used per dot.

• 600 dpi, 1 bit

The printer prints in 600 dpi, with two-valued dots.

• 600 dpi, 2 bit

The printer prints in 600 dpi, with multi-valued dots.

• 300 dpi, 1 bit

The printer prints in 300 dpi, with two-valued dots.

❖ 2.Color Mode

86

You can select either monochrome or color printing.

• Color

• Black & White