Lanier AP206 Making printer settings from an application, Reference, D Click OK to start printing

RICOH-SCRIPT2 - Setting Up for Printing

Reference

For more information about making printer default settings, see the “Op- erating Instructions” for RICOH-SCRIPT2 included as a PDF file on the CD-ROM.

Note

1

❒Settings you make here are used as the default settings when printing from applications.

Making printer settings from an application

To make the printer settings for a specific application, open the Document Prop- erties from that application. The following example describes how to make set- tings for the WordPad application that comes with Windows NT 4.0.

Note

❒General users can change the settings in an application's [Print] window.

❒The actual procedures you should follow to open the Document Properties may differ depending on the application. For more information about the procedures, see the documentation that comes with the application you are using.

❒Any settings you make in the following procedure are valid for the current application only.

A On the [File] menu, click [Print].

The [Print] window appears.

B From the [Name:] box, select the printer you want to use, and then click [Properties].

The Printer Properties appear.

C Make desired settings, and then click [OK].

Reference

For more information about each tab, see the “Operating Instruction” for RICOH-SCRIPT2 included as a PDF file on the CD-ROM.

D Click [OK] to start printing.

11