Lanier AP206 Switching between Paper Trays, Paper Tray j Tray1/A4 l, Paper Tray j *Tray1/8.5x11 l

Loading Paper

Switching between Paper Trays

When paper of the same size is load- ed in both the standard tray and the paper feed unit (option), and when “Auto Tray Select” is set with the printer driver, paper will be fed from the standard tray when you start printing. To print on paper loaded in the paper feed unit, switch the tray to be used to the paper feed unit using

“1 . Paper Tray ” in the System Menu.⇒ P.90 “System Menu”

Printing a configuration page from tray 2

If “Custom Size” is applied to tray 1 (the standard tray), you cannot print a configuration page, a color sample, a job log and a statistics report using paper set in tray 1. In this case, set A4 or Letter size paper in tray 2 (optional paper feed unit), and then proceed as follows to print a desired sheet using paper set in tray 2.

A Press {Media}.

Power	On Line	Data In
		Reset

Error

Menu Escape

Media Enter

ZDHS021E

The “Media” menu appears.

<Media>	j
1. Paper Tray	l

B After confirming that “1. Paper Tray” is on the display, press {#Enter}.

The Paper Tray menu appears.

•Metric version

<Paper Tray> j

*Tray1/A4 l

• Inch version

3

<Paper Tray> j *Tray1/8.5x11 l

Note

❒An asterisk (*) indicates the cur- rently selected paper tray.

C Press {U} and {T} to display “Tray2/(paper size)”, and then press {#Enter}.

This selects the paper feed unit, and the “Media” menu appears.

D Press {On Line}.

The normal display screen ap- pears.

Note

❒To return to the standard tray, select “Tray1/(paper size)” in step C.

33