Lanier AP206 manual Adjusting the Image Density

Cleaning and Adjusting the Printer

Adjusting the Image Density

Changing the image density setting might cause a deterioration of color balance. We recommend that you normally leave the image density at its factory default setting.

The following procedure describes how to change the magenta image density. You can use the same proce- dure to change the image density for the other toner colors as well.

Important

❒Extreme settings may create out- put that appears dirty.

❒Image density settings should be made from the application or the printer driver whenever possible.

A Turn on the printer's power switch.

B Press {Menu}.

Power	On Line	Data In
		Reset

Error

Menu Escape

Media Enter

ZDHS031E

The following message appears on the panel display.

<Menu>	j
IPDL-C Menu	l

C Press {T} or {U} to display "Maintenance", and then press {#Enter}.

<Menu> j

Maintenance l

The following message appears on the panel display.

	<Maintenance> j
	1.Toner Level l
D After confirming that “1. Toner
		4
	Level” is on the display, press

{#Enter.}

The following message appears on the panel display.

<Toner Level> j

Cyanl

E Press {T} or {U} to display "Ma- genta", and then press {#Enter}.

The following message appears on the panel display.

<Magenta> jl/# -<-----g----->+

F Press {U} or {T} to adjust the toner density, and then press {#Enter}.

The "Toner Level" menu appears.

Note

❒To make the image density darker, press {U} to move the g symbol to the right. To make it lighter, press {T} to move the g symbol to the left.

G Press {On Line}.

The "Ready" message appears on the panel display.

63