Lanier AP206 Slide the paper tray into the paper feed unit until it stops, ZDGY060J, ZDGY070J

Paper and Other Media

B Slide the paper guides to posi- tions that match the size of paper you want to load.

3

D

ZDGY060J

❒The front and side guides should be set to the correct paper size to avoid paper feed problems.

❒Load only plain paper in the pa- per feed unit. To print on thick paper, adhesive labels, OHP transparencies or envelopes, use the standard tray.

❒To avoid paper multi-feeds, shuffle sheets before loading them in the tray.

Slide the paper tray into the paper feed unit until it stops.

Important

❒Be sure to insert the paper tray completely, or paper misfeeds might occur.

❒If the paper size shown on the panel display differs from the size of paper actually loaded, re-adjust the position of the pa- per guides.

ZDGY070J

C Load paper into the tray with the side to be printed facing up.

ZDGY080J

Important

❒Confirm that the top of the stack is not higher than the limit mark (T) inside the tray.

32