Lanier AP206 manual ⇒ P.56 When the Message, Open Rear Cover Remove, Set ⇒ P.29 Loading Paper

Troubleshooting

	Message	Description	Comments
	Open Rear Cover	There is a paper misfeed in the	Remove the misfed paper.
	Remove Misfeed	printer.	⇒ P.56 “When the Message
			"Open Rear Cover Remove
			Misfeed" Appears”
	Paper Size Error	There is a difference between	Check if the correct paper is
		the paper size in the tray and	set ⇒ P.29 “Loading Paper”
		the requested paper size from
		the computer.
	Paper Type Error	There is a difference between	Check if the correct paper is
		the paper type in the tray and	set ⇒ P.29 “Loading Paper”
		the requested paper type from
		the computer.
	Remove Misfeed From Output	There is a paper misfeed in the	Remove the misfed paper.
4
	Tray	printer.	⇒ P.57 “When the Message
			"Remove Misfeed From Out-
			put Tray" Appears”
	Remove Misfeed From Paper	There is a paper misfeed in the	Remove the misfed paper.
	Tray	printer.	⇒ P.54 “When the Message
			"Remove Misfeed From Paper
			Tray" Appears”
	Reset Cleaner	The fuser cleaner roller is not	Install the fuser cleaner.⇒
	Correctly	installed in the printer.	P.76 “Replacing the Fuser
			Cleaner”
	Reset Fusing Unit Correctly	The fusing unit is not installed	Contact your sales or ser-
		in the printer.	vice representative.
	Reset PCU Correctly	The photoconductor unit is not	Install the photoconductor
		installed in the printer.	unit. ⇒ P.68 “Replacing the
			Photoconductor Unit”
	Reset Paper Tray Correctly	The paper tray is not installed	Install the paper tray cor-
		correctly.	rectly.
	Reset Transfer	The transfer roller is not in-	Contact your sales or ser-
	Roller Correctly	stalled correctly.	vice representative.
	Reset xxx Toner Correctly	The indicated toner cartridge is	Install the indicated toner
		not installed in the printer.	cartridge.⇒ P.66 “Replacing
			the Toner Cartridge”
	Warming Up	The printer is warming up or	Wait until the printer re-
		processing internally.	turns to the ready condition
			or finishes processing inter-
			nally.
	Waste T Full	The waste toner bottle is full.	Replace the waste toner
			bottle.⇒ P.75 “Replacing the
			Waste Toner Bottle”
	Waste Toner is Full	The waste toner bottle is full.	Replace the waste toner
			bottle. ⇒ P.75 “Replacing the
			Waste Toner Bottle”

38