Lanier AP206 manual Unit. ⇒ P.68 Replacing Photoconductor Unit, Replacing the Toner Car Tridge

		Error & Status Messages
Message	Description	Comments
Rear Cover Open	The rear cover is open.	Close the rear cover. ⇒ the
		"Setup Guide" that comes
		with the printer
Time to Change Fuser Cleaner	It is time to replace the fuser	Replace the fuser cleaner. ⇒
	cleaner.	P.76 “Replacing the Fuser Clean-
		er”
Time to Change Fusing Unit	It is time to replace the fusing	Contact your sales or service
	unit.	representative.
Time to Change PCU	It is time to replace the photo-	If printed side gets dirty, re-
	conductor unit.	place the photoconductor
		unit. ⇒ P.68 “Replacing the
		Photoconductor Unit”
Time to Change XX	It is time to replace the unit in-	Contact your sales or service	4
	dicated by XX.	representative. XX indicates
		the unit to be replaced as fol-
		lows: T1: Transfer drum R1:
		Pick-up roller for the standard
		tray R2: Pick-up roller for the
		paper feed unit D1: Paper dis-
		charger
Toner is Empty	A toner cartridge runs out.	Replace the toner cartridge.⇒
		P.66 “Replacing the Toner Car-
		tridge”
Top Cover Open	The top cover remains open.	Close the top cover.
TransferRoller:NotSetCor-	The transfer roller is not in-	Contact your sales or service
rectly	stalled correctly.	representative.
Tray2 : Not Set Correctly	The paper feed unit (option) is	Install the paper feed unit cor-
	not installed correctly.	rectly.⇒the "Setup Guide"
		that comes with the printer
Warming Up	The printer is preparing for	Wait until the printer is
	printing.	warmed up.
Waste Toner is Full	The waste toner bottle is full.	Replace the waste toner bottle.
		⇒ P.75 “Replacing the Waste
		Toner Bottle”
XXX: Not Set Correctly	The indicated toner cartridge	Install the indicated toner car-
	is not installed correctly.	tridge correctly.⇒ P.66 “Re-
		placing the Toner Cartridge”
xxx Toner is Empty	The indicated toner is low or	Replace the indicated toner
	has run out.	cartridge.
		⇒ P.66 “Replacing the Toner
		Cartridge”

43