Lanier AP206 manual Error & Status Messages, Printed Error Messages

4. Troubleshooting

Error & Status Messages

There are three types of error and status messages.

•Printed error messages

•Error and status messages on the operation panel

•Printer information received from the network

Printed Error Messages

The error message shown below is printed by the printer whenever there is not enough memory to print data.

Error message	Required action
There is not enough memory in your printer to	The following are the actions you should take
print this page.Change print quality in the	when you encounter memory shortage prob-
printer driver and try again.For details, please	lems. If these actions do not solve the problem
refer to the troubleshooting section in your	individually, try them in combination with
manual.	each other. ⇒ P.114 “Low Memory”
	A Increase printer memory.
	Install the optional memory unit to in-
	crease the amount of printer memory.
	B Reduce resolution.
	Use the printer driver to set resolution to
	300 dpi.
	⇒Help of the printer driver
	⇒”RICOH-SCRIPT2 Operating Instruc-
	tions”
	C Turn on “Image Memory”.
	Use the printer's “System Menu” to turn on
	“Image Memory”.⇒ P.90 “System Menu”

35