Lanier AP206 manual List Print j 1.Config.Page l, Menu List Print, Maintenance j 1.Toner Level l

Troubleshooting

Adjusting the Setting of Registration of the Paper Tray

Adjusting the registration refers to changing the position of the printed image on paper fed from the optional tray so it matches that of the standard tray. Probably you will never need to perform this procedure.

Note

❒Use A4 or 81/2”⋅11” paper to print the configuration page.

4A Turn on the printer's power switch.

B Press {Menu}.

Power	On Line	Data In
		Reset

Error

Menu Escape

Media Enter

ZDHS031E

The following message appears on the panel display.

<Menu>	j
IPDL-C Menu	l

C Press {T} or {U} to display "List Print", and then press {#Enter}.

The following message appears on the panel display.

<List Print> j 1.Config.Page l

D After confirming that "1.Config.Page" is displayed, press {#Enter}.

E Press {#Enter} again.

This prints the configuration page.

Important

❒If printing does not start, check the panel display for any error messages and take the action re-

quired to correct the problem.

⇒ P.36 “Error & Status Messages on the Operation Panel”

F After confirming that "1.Con- fig.Page" is displayed, press {Es- cape}.

The following the message ap- pears on the panel display.

<Menu>	j
List Print	l

G You can find the crop marks on the long edge of the configuration page. Check if the left and right margins on the long edge of the configuration page are as shown in the illustration.

H If the left and right margins are not the same, press {U} or {T} to display "Maintenance", and then press {#Enter}.

<Menu> j

Maintenance l

The following message appears on the panel display.

<Maintenance> j 1.Toner Level l

64