Lanier AP206 manual Replacing the Waste Toner Bottle, IPDL-C Waste T Full Waste Toner is Full

Replacing Consumables

F Stuff some clean, wadded paper towels into the space where the oil bottle was installed so that any residual oil is absorbed.

ZDHH230E

G Close the top cover.

Replacing the Waste Toner Bottle

Replace the waste toner bottle when- ever the following messages appear on the panel display.

IPDL-C

Waste T Full

Waste Toner is

Full

RWARNING:

•Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame.

•Disposal can take place at our authorized dealer or at appro- priate collection sites.

•If you dispose of the used ton- er containers yourself, dis- pose of them according to your local regulations.

RCAUTION:

•When accessing the inside of the machine, do not touch any sec- tions other than those specified in this manual. If you do, it might result in receiving a burn or inju- ry.

•Do not open the front cover when the paper tray is pulled out halfway. If you do, it might cause a personal injury.

Important	4
❒ Waste toner bottles are consum-
able items and cannot be reused.

We recommend that you purchase extra waste toner bottles and keep them on hand for replacement when necessary.

Note

❒Before removing the waste toner bottle from the printer, spread pa- per or some other material around the area you are working to keep the toner from making the floor dirty.

A Turn off the printer's power switch.

B Open the front cover by pulling the front cover open lever.

ZDGH160J

75