Lanier AP206 manual See P.114 Low Memory, Ing the Operation Panel

		Error & Status Messages
Message	Description	Comments
A3:Error	There is too much data for the	Check if the interface cable
	I/O buffer to handle.	is inserted into the printer
		and the computer securely.
		Check if the interface cable
		is damaged or broken.
		Increase the size of the I/O
		buffer. ⇒ P.79 “Using the
		Operation Panel”
A6:Error	There is not enough printer	See P.114 “Low Memory”.
	memory to print one or more of
	the pages in the print job.
AB:Error	The printer is unable to process	Install optional memory
	the data you are trying to print.	unit to increase the amount
		of printer memory.
		Reduce the amount of data
		being sent to the printer.
B0:Error	An error has occurred in the	Turn the printer off and on.
	optional memory unit.	Then, try to print again.
		Turn off the printer. Re-
		move and reinstall the
		memory unit and turn on
		the printer. Then, try to
		print again.
		Turn off the printer. Re-
		move the memory unit and
		turn on the printer. Then,
		try to print again.
		Note
		❒ In this case, you might
		not be able print com-
		plex print jobs.
B1:Error	An error has occurred in the	Contact your sales or ser-
	standard parallel interface.	vice representative.
B3:Error	The printer setting is wrong.	Reset the printer using
		"Menu Reset" of the "Main-
		tenance" menu. ⇒ P.79 “Us-
		ing the Operation Panel”
B5:Error	An error has occurred in the	Contact your sales or ser-
	RICOH-SCRIPT2 module.	vice representative.

4

39