Lanier AP206 manual Energy Saver, Transfer, Image Memory, Parallel

Menu Settings

❖4. Energy Saver

You can select after how many minutes the printer should enter the Energy Saver mode if no operation is performed. The Energy Saver mode reduces electric power consumption.

•5min

•15min

•30min

•45min

•60min

Important

❒After the printer enters Energy Saver mode, it takes some time to warm up again when print data is received.

❖5. Transfer

You can select the data transfer speed of the parallel interface. If you are hav-

ing trouble with data transfers, try changing this setting to “Normal”. 5

•Hi-speed

•Normal

❖6. Image Memory

This setting controls what the printer does when the printer memory is insuf- ficient to print a certain page.

•On

•Off

Note

❒“Off” causes the message shown below to be printed when there is insuf- ficient memory to process.

There is not enough memory in your printer to print this page.

Change print quality in the printer driver and try again.

For details, please refer to the troubleshooting section in your manual.

❒Selecting “On”reduces the resolution of the image to reduce memory re- quirements.

❖7. Parallel

You can select the parallel interface timing setting. Normally it is not neces- sary to change this setting.

• ACK Inside

• ACK Outside

• STB Down

91