Lanier AP206 manual Maintenance Menu, Changing the Printer Language, Ethernet, Prt.Priority

Menu Settings

Maintenance Menu

This section describes two settings you can make with the “Maintenance” menu.

Note

❒Italicized settings indicate default settings.

❖Ethernet

You can select the data transfer speed when using the network interface board.

•Auto

•10 Mbps

•100 Mbps

❖Prt.Priority

You can select the timing for printing and paper feeding operation within the printer. Use the “Speed” setting so that the printer performs both the printing 5 and paper feeding at the same time. Use the “Quality” setting so that the printer does not perform paper feeding during printing. Thus the print qual-

ity is more stabilized, while printing speed becomes slower than when select- ing the “Speed” setting.

•Speed

•Quality

Changing the Printer Language

This section describes how to change the printer language on the operation pan- el. Changing IPDL-C or RICOH-SCRIPT2 (RPS2) is required when you set the menu for each printer language.

A Press {Menu}.

Power	On Line	Data In
		Reset

Error

Menu Escape

Media Enter

ZDHS031E

The following message appears on the panel display.

<Menu>	j
IPDL-C Menu	l

93