4 VIDEO SETUP
Video settings are made as follows.
1. Select “Video Setup” from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button.
SR6004
Video Setup |
|
|
Video Convert |
|
|
OSD Information | : Enable | |
HDMI Output |
| : Output1 |
HDMI Output Resolution | : Auto | |
Component Output | : Main Zone | |
Component I / P Convert | : Disable | |
Return |
|
|
: Up / Down | : | Enter : Select Exit : Exit |
|
| SR5004 |
Video Setup |
|
|
Video Convert |
|
|
• Video Convert
This unit is equipped to convert video signals for monitor output.
This section explains how to set up conversion for each type of video input.
1. Select “Video Convert” with the 3 or
4 cursor buttons and press the ENTER button.
Video Convert |
|
|
|
| : Analog & HDMI |
| |
DVD |
| : Analog & HDMI |
|
VCR |
| : Analog & HDMI |
|
DSS |
| : Analog & HDMI |
|
TV |
| : Analog & HDMI |
|
CD/CDR |
| : Analog & HDMI |
|
AUX |
| : Analog & HDMI |
|
| : Analog & HDMI |
| |
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
• OSD Information
Select the OSD information function to “Enable” or “Disable” with the 1 or 2 cursor buttons.
If you select “Enable”, this unit will display the status of the feature (Volume up/down, input select, etc..) on the monitor. If you do not desire this information, select “Disable”.
Note
•OSD information is not output to Monitor Output of HDMI and Component Video. However, OSD information is output if the Video Convert function is used to output Video video signals to Monitor Out of HDMI and Component Video.
For details, refer to“Video Convert”on page 44.
•HDMI Output (SR6004 only)
This setting is for selecting which output terminal, HDMI 1 or HDMI 2, to output the signal to. Select the output destination with the 1 / 2 cursor buttons.
ENGLISH
SETUP
Notes
•This setting is enabled only when Video Convert is set to other than Off.
•When a monitor is connected to the HDMI MONITOR OUT terminal, and HDMI RESOLUTION is set to 720p, 1080i, 1080p, or AUTO, the I/P CONVERT for COMPONENT VIDEO OUTPUT does not function.
After you complete this portion of the setup, move cursor to “Return” with the 3 or 4 cursor buttons and press the ENTER button.
NAMES AND | FUNCTIONS |
BASIC | CONNECTIONS |
BASIC | OPERATION |
ADVANCED | CONNECTIONS |
OSD Information | : Enable |
HDMI Output Resolution | : Auto |
Component I / P Convert | : Disable |
Return
: Up / Down | : | Enter : Select Exit : Exit |
2. Select the desired menu with the 3 or
4 cursor buttons and press the ENTER button.
2. Select “Function” with the 3 or 4 cursor buttons and set the video conversion mode with the 1 or 2 cursor buttons.
Analog&HDMI:
This mode both
Analog Only:
This mode both
Off:
This mode turns off all conversion features.
Note
•For details on video convert feature, see page 43.
• HDMI Output Resolution
Selects the resolution of the video signal output from the HDMI terminal of this unit.
Select from the following using the 1 or 2 cursor buttons.
Auto ↔ Through ↔ 480p/576p ↔ 720p ↔ 1080i
↔1080p ↔ Auto ↔ ...
•Component Output (SR6004 only)
This setting is for selecting whether to output the images for the main zone or the images for the zone system to the COMPONENT MONITOR OUT terminal. Select the output destination between Main Zone and Zone A with the 1 / 2 cursor buttons.
• Component I/P Convert
Set whether or not to convert 480i/576i signals to 480p/576p signals when outputting the analog video input signal input from the VIDEO terminals or COMPONENT terminals.
Select “Enable” or “Disable.” Disable: Do not convert Enable: Convert
SETUP |
ADVANCED OPERATION |
TROUBLESHOOTING |
OTHERS |
35