CONNECTING THE ANTENNAS
CONNECTING THE SUPPLIED ANTENNAS
The supplied antennas are for indoor use only.
CONNECTING THE AC POWER
CABLE
1. Plug the supplied AC power cable to the AC
ENGLISH
BASIC CONNECTIONS
NAMES AND FUNCTIONS |
FM
(75Ω)
| ASSEMBLING THE AM LOOP ANTENNA | ||
| Insertting the tabs into the base as shown. | ||
| CONNECTING THE AM ANTENNA CABLE | ||
White | Press and hold | Insert wire | Release |
|
IN socket on the rear panel of the unit.
2. Plug the power cable into an AC outlet.
BASIC | CONNECTIONS |
BASIC | OPERATION |
ADVANCED | CONNECTIONS |
Notes
•During use, extend the FM antenna and move it in various directions until the clearest sound is received. Fix it with push pins or similar implements in that cause the least amount of distortion.
•Set in the direction and position it to where you receive the clearest sound. Put it as far away as possible from the unit, televisions,speaker cables and power cable.
CONNECTING AN OUTDOOR ANTENNAS
If you experience poor reception quality, an outdoor antenna may improve the quality.
Keep the antenna from noise sources (neon signes, busy roads, power lines, transformers, etc)
SETUP |
FM External
Antenna
Black
White
GND AM
FM
(75Ω)
AM External
Antenna16 to 32ft (5 to 10m)
ADVANCED OPERATION |
TROUBLESHOOTING |
Notes
•Do not remove the AM loop antenna.
•Do not connect the supplied FM antenna.
•The terminal marked “GND” on this unit is not for safety grounding.
OTHERS |
15