NAMES |
ENGLISH
OTHERS
FUNCTIONS | AND |
CONNECTIONS | BASIC |
OPERATION | BASIC |
CONNECTIONS | ADVANCED |
TECHNICAL SPECIFICATIONS
FM TUNER SECTION
Frequency Range | 87.5 – 108.0 MHz |
Usable Sensitivity | IHF 1.8 μV/16.4 dBf |
Signal to Noise Ratio | Mono/Stereo 75/70 dB |
Distortion | Mono/Stereo 0.2/0.3 % |
Stereo Separation | 1 kHz 45 dB |
Alternate Channel Selectivity ... ± 400 kHz 60 dB | |
Image Rejection | 98.1 MHz 70 dB |
Tuner Output Level
.................... 1 kHz, ± 75 kHz Dev 800 mV
AM TUNER SECTION
Frequency Range | 520 – 1710 kHz |
Signal to Noise Ratio | 50 dB |
Usable Sensitivity | Loop 400μV/m |
Distortion | 400Hz, 30 % Mod. 0.5 % |
Selectivity | ± 20 kHz 70 dB |
Input Sensitivity/Impedance
...................................180 mV/ 47 Kohms
Signal to Noise Ratio(Analog Input / Pure Direct)
....................................................... 105 dB
Frequency Response (Analog Input / Pure Direct)
.............................8 Hz – 100 kHz (± 3 dB)
(Digital Input / 96 kHz PCM)
...............................8 Hz – 45 kHz (± 3 dB)
VIDEO
Television Format | NTSC |
Input Level/Impedance | 1 |
Output Level/Impedance | 1 |
Video Frequency Response
| ..............................5 Hz to 8 MHz (– 1 dB) |
Video Frequency (Component) | |
| ............................5 Hz to 80 MHz (– 1 dB) |
S/N | ............................................................. 60 dB |
COPYRIGHT
Recording and playback of any material may require consent. For further information refer to the following:
—Copyright Act 1956
—Dramatic and Musical Performers Act 1958
—Performers Protection Acts 1963 and 1972
—Any subsequent statutory enactments and orders
CLEANING OF EQUIPMENT
EXTERNAL SURFACES
The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft,
If the equipment becomes heavily soiled:
•dilute some washing up liquid in water, in a ratio of one part detergent to six parts water.
•dip a soft, lint free in the solution and wring the it is damp.
•wipe the equipment with the damp cloth.
•dry the equipment by wiping it with a dry cloth.
SETUP |
ADVANCED OPERATION |
TROUBLESHOOTING |
OTHERS |
AUDIO SECTION
Power Output (20 Hz – 20 kHz/THD=0.08%)
(SR6004)
Front L&R | 8 ohms 110 W / Ch |
Center | 8 ohms 110 W / Ch |
Surround L&R | 8 ohms 110 W / Ch |
Surround Back L&R | 8 ohms 110 W / Ch |
Front L&R | 6 ohms 130 W / Ch |
Center | 6 ohms 130 W / Ch |
Surround L&R | 6 ohms 130 W / Ch |
Surround Back L&R | 6 ohms 130 W / Ch |
(SR5004) |
|
Front L&R | 8 ohms 90 W / Ch |
Center | 8 ohms 90 W / Ch |
Surround L&R | 8 ohms 90 W / Ch |
Surround Back L&R | 8 ohms 90 W / Ch |
Front L&R | 6 ohms 115 W / Ch |
Center | 6 ohms 115 W / Ch |
Surround L&R | 6 ohms 115 W / Ch |
Surround Back L&R | 6 ohms 115 W / Ch |
HDMI
Input / Output jacks | |
| (HDMI V.1.3 with Deep |
| Color, Dolby True HD, |
| |
| SACD, |
GENERAL
Power Requirement | AC 120 V 60 Hz |
Power Consumption | 650 W |
Standby Power Consumption.... | (Normal) 0.7 W |
...................................... | (Economy) 0.4 W |
Weight | (SR6004) 12.7 kg |
...................................... | (SR5004) 12.7 kg |
Specifications subject to change without prior notice.
REPAIRS
Only the most competent and qualified service technicians should be allowed to service the
In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment’s behaviour.
90
