Marantz SR5004 Xm Satellite Radio, Sirius Satellite Radio, Front Key Button Lock Of The Unit

FUNCTIONS	NAMES AND
CONNECTIONS	BASIC
OPERATION	BASIC
CONNECTIONS	ADVANCED
SETUP
OPERATION	ADVANCED
TROUBLESHOOTING
OTHERS

ENGLISH

TROUBLESHOOTING

XM SATELLITE RADIO

If a problem should arise, first check the following.

1.Are the connections correct?

2.Have you operated the receiver according to the operating instructions?

3.Are the speakers and other components operating properIy?

If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase.

Symptom	Cause	Solution	Page
“TUNER” is	The XM Mini-Tuner and this unit	Check that the units are properly	23
displayed.	are not properly connected.	connected.
“ANTENNA” is	The XM antenna is not properly	Check that the antenna is properly
		connected. Also, check the	23
displayed.	connected to the Mini-Tuner Dock.
		antenna cable for damage.
“NO SIGNAL” is	The Signal cannot be received.	Reposition your XM antenna.	–
displayed.
Receiving only	The XM Mini-Tuner is not activated.	Contact XM Satellite Radio.	47
channels 0 and 1.
		Upgrade the XM CNP-1000 to the
“UPGRADE	The connected XM CNP-1000 is	XM Mini-Tuner.	47
TUNER” is		Report the model of the AV
	incompatible.
displayed.		receiver and the ID number of the
		CNP-1000 to XM Listener Care.

SIRIUS SATELLITE RADIO

Symptom	Cause	Solution	Page
“TUNER ERR” is	SiriusConnectTM tuner is not	Check the 8pin mini DIN cable and	23
displayed.	properly connected.	AC adapter connection are correct.
“ANTENNA” is	Antenna is not properly connected.	Check the antenna cable	23
displayed		connection is correct.
“ACQUIRING” is	The signal cannot be received.	Reposition your SiriusConnectTM	–
displayed.		tuner and antenna.
“CALL SIRIUS” is	You have not subscribed for the	Call SIRIUS if you want to	47
displayed	selected channel.	subscribe.
“FIRM UPDT” is	SiriusConnectTM is updating	Wait until the updating is	–
displayed	software.	complete.

FRONT KEY (BUTTON)

LOCK OF THE UNIT

PURE DIRECT EXIT

The keys (buttons) on the front panel of the unit (except POWER ON/STANDBY) can be locked so that, except for remote control operations, none of the unit's operations will be acknowledged.

HOW TO LOCK THE FRONT KEYS (BUTTONS)

1. Hold down both the PURE DIRECT and EXIT buttons on the front panel simultaneously for at least 3 seconds.

2. “F-KEY LOCK!” is indicated on the display, and no further operations initiated by the front panel buttons, with the exception of POWER ON/STANDBY, are acknowledged.

HOW TO RELEASE THE FRONT KEY (BUTTON) LOCK

1. Again hold down both the PURE DIRECT and EXIT buttons on the front panel simultaneously for at least 3 seconds.

2. “F-KEY UNLOCK” is indicated on the display, and the lock is released.

GENERAL MALFUNCTION

If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore:

-disconnect the plug from the AC line supply

-after waiting at least three minutes, reconnect the plug to the AC line supply

-re-attempt to operate the equipment

MEMORY BACKUP

In case a power outage occurs or the power cord is accidentally unplugged, this unit is equipped with a backup function to prevent memory data such as the preset memory from being erased.

HOW TO RESET THE UNIT

SURR. MODE CLEAR

Should the operation or display seem to be abnormal, reset the unit with the following procedure.

This unit is turned on, press and hold the SURR. MODE + CLEAR buttons simultaneously for 3 seconds or more.

Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their initial settings.

82