LIP.SYNC

Depending on the image device (TV, monitor, projector, etc.) connected to the unit a time lag can occur between image signal processing and audio signal processing. Though minor, this time lag can interfere with movie and music enjoyment. The LIP.SYNC feature delays the audio signal with respect to the image signal output from the unit to correct the time lag between the sound and image. It can be operated with the “LIP SYNC” and 1 and 2 cursor buttons of the remote controller. Set the remote controller to the AMP mode before operating the LIP.SYNC feature. The initial setting is OFF (0 ms).The time lag can be adjusted in 10 ms steps up to 200 ms.

Watch the picture on the image device (i.e., TV, monitor, projector, etc.) as you adjust the time lag.

USING THE SLEEP TIMER

To program this unit for automatic standby, press the SLEEP button on the remote controller.

Each press of the button will increase the time before shut down in the following sequence.

OFF 10 20 30 40 50

120 110 100 90 80 70 60

The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed.

When the programmed sleep time has elapsed, the unit will automatically turn off.

Note that the SLEEP indicator on the display will illuminate when the Sleep function is programmed. To cancel the Sleep function, press the SLEEP button until the display shows “SLEEP OFF” and the SLEEP indicator will disappear.

DUAL BACKUP MEMORY

The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed.

BACKUP

Set up the unit in the state for which you want to store the settings. Hold the MEMORY and ENTER buttons on the front panel simultaneously for at least 3 seconds.

“MEMORY SAVING” is displayed and the unit’s settings are saved. The stored settings information is retained until Dual Backup Memory is used again and the information is overwritten.

M E M O R Y S A V I N G

ENGLISH

ADVANCED OPERATION

RECOVERY OF MEMORY

Recover backed up settings as follows.

Hold the MEMORY and MENU buttons on the front panel simultaneously for at least 3 seconds.

“MEMORY LOAD” is displayed and the unit’s stored settings are reapplied.

The unit temporarily enters standby mode. If there is no backup data, “NO BACKUP” is displayed and no data is recovered.

M E M O R Y L O A D

N O B A C K U P

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

Notes

•The LIP.SYNC feature turns OFF (0 ms) in the SOURCE/PURE DIRECT mode. When the SOURCE/PURE DIRECTmode is deactivated, the set value of the LIP.SYNC feature is automatically restored.

•Even if you do not correct the time lag manually this way, audio and video are automatically synchronized when the unit is connected to TV or Projector supporting Auto Lipsync Correction in HDMI 1.3a. For instructions on Auto Lipsync Correction, see page 36.

FRONT KEY (BUTTON) LOCK OF THE UNIT

To lock all front panel buttons (except the POWER ON/ OFF button) and the INPUT SELECTER and VOLUME knobs, hold the PURE DIRECT and EXIT buttons on the front panel simultaneously for at least 3 seconds. At this time, “F-KEY LOCK!” is displayed.

To unlock the controls, press the same buttons again simultaneously for at least 3 seconds. At this time, “F-KEY UNLOCK” is displayed, and the buttons are released.

SURR.

PURE EXIT

CLEAR

MODE

DIRECT

 

Note

The following settings values cannot be backed up, each Volume value is set to Minimum.

•Main ZONE Volume

•ZONE A Volume

•ZONE Speaker A Volume

ADVANCED OPERATION

TROUBLESHOOTING

OTHERS

43

Page 44 Page 46
Page 45
Image 45
Marantz SR6004, SR5004 manual Lip.Sync, Using the Sleep Timer, Dual Backup Memory, Recovery of Memory
Page 44 Page 46

SR6004, SR5004 specifications

The Marantz SR5004 and SR6004 are distinguished models in the world of home theater receivers, offering a perfect blend of high-quality audio performance and advanced technology. Both of these receivers are designed to cater to audiophiles and home theater enthusiasts alike, providing a solid foundation for an immersive audio experience.

The Marantz SR5004 is built on core features that focus on the highest quality audio. It boasts a power output of 100 watts per channel, enabling it to drive a wide range of speakers with ease. One of its signature technologies is the inclusion of Marantz's proprietary HDAM (High Definition Amplifier Modules), which significantly enhances the amplifier performance. This results in lower noise levels and higher dynamic range, allowing for clearer and more detailed sound reproduction.

The receiver supports multiple audio formats and is equipped with five HDMI inputs and one output, making it versatile for connecting various devices like Blu-ray players and gaming consoles. Additionally, it features 7.1 channel surround sound, ensuring a full, immersive audio experience for home theater setups. Another important aspect of the SR5004 is its robust video processing capabilities, which support 1080p video upscaling, thereby enhancing the visual performance of standard-definition content.

The SR6004, on the other hand, takes performance a step further. With an impressive power output of 110 watts per channel, it can handle more demanding speaker configurations. The SR6004 also features Marantz's proprietary Audyssey MultEQ technology, which automatically calibrates your speakers to the acoustics of your room, optimizing sound distribution across all seating positions. It is particularly beneficial for larger rooms where audio performance can vary significantly.

Both models support advanced networking capabilities, featuring Ethernet ports that allow streaming of music from various online platforms. The SR6004 goes further with its compatibility with DLNA streaming, offering a seamless way to access digital music files from a home network.

In terms of connectivity, both receivers offer a range of inputs and outputs, including component, composite, and optical audio connections, providing flexibility for any setup.

With sleek designs and intuitive interfaces, the Marantz SR5004 and SR6004 are user-friendly, making them accessible for both novices and seasoned enthusiasts. Whether for a movie night or a rich listening session, these receivers match audio quality with modern technology, making them a sound investment for any home theater system.
Top Page Image Contents