![2 SPEAKER SETUP](/images/new-backgrounds/18201/1820157x1.webp)
2 SPEAKER SETUP
Speaker Setup
Auto Setup
Manual Setup
ENGLISH
SETUP
2-1 AUTO SETUP (AUDYSSEY MULTEQ®)
NAMESAND FUNCTIONS |
After you have installed the unit connected all the components and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.
Before you perform the following settings, it is important that you first determine the following characteristics:
• Auto Setup:
• Manual Setup:
1. Select “Speaker Setup” from the Main Menu with 3 or 4 cursor buttons and press the ENTER button.
2. Select the desired menu with the 3 or
4 cursor buttons, and press the ENTER button.
Note
•After you complete this the portion of the setup, press the 3, 4, 1, and 2 cursor button. The cursor will move to “Return” and press the ENTER button to go to the
Return
: Up / Down | : | Enter : Select Exit : Exit |
☞P. 28
Audyssey MultEQ Setup |
|
| |
StartManual Setup |
|
| |
Front Height | : Yes |
| |
Surround Back | : 2ch |
| |
Return |
|
|
|
: Up / Down | : | Enter : OK | Exit : Exit |
Audyssey MultEQ Setup |
|
| |
Speaker Check : - - |
| ||
| 1st Mic Position |
|
|
| Now Analyzing!! |
|
|
Cancel |
|
|
|
: | : | Enter : OK | Exit : Exit |
Audyssey MultEQ Setup
Speaker Check : OK
2nd Mic Position
Start
Check
Calculate
: Up / Down | : | Enter : OK | Exit : Exit |
Audyssey MultEQ Setup
Now Analyzing!!
Cancel
: | : | Enter : OK | Exit : Exit |
Audyssey MultEQ Setup
--------------
Now Calculating!
: | : | Enter : | Exit : |
Check Result
Speakers Config
Speakers Size
Speakers Distance
Channel Level
Crossover Frequency
Store
: Up / Down | : | Enter : Select Exit : Exit |
☞ P. 31
Manual Setup
Speakers Size
Speakers Distance
Speakers Level
Return
: Up / Down | : | Enter : Select | Exit : Exit |
Speakers Size |
|
|
|
Subwoofer |
| : Yes |
|
Front |
| : Small |
|
Front Height |
| : Small |
|
Center |
| : Small |
|
Surround |
| : Small |
|
Surround Back |
| : 2ch |
|
Surround Back Size | : Small |
| |
LPF / HPF |
| : 80Hz |
|
Bass Mix |
| : * * * |
|
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
Speakers Distance |
|
| |
Unit |
| : Feet |
|
Front Left |
| : 10.0 ft |
|
Front Height Left | : 10.0 ft |
| |
Center |
| : 10.0 ft |
|
Front Height Right | : 10.0 ft |
| |
Front Right |
| : 10.0 ft |
|
Surround Right | : 10.0 ft |
| |
Surround Back Right | : 10.0 ft |
| |
Surround Back Left | : 10.0 ft |
| |
Surround Left |
| : 10.0 ft |
|
Subwoofer |
| : 10.0 ft |
|
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
Speakers Level |
|
|
|
Test ModeFront Left | : Manual |
| |
Front Left |
| : 0.0dB |
|
Front Height Left | : 0.0dB |
| |
Center |
| : 0.0dB |
|
Front Height Right | : 0.0dB |
| |
Front Right |
| : 0.0dB |
|
Surround Right | : 0.0dB |
| |
Surround Back Right | : 0.0dB |
| |
Surround Back Left | : 0.0dB |
| |
Surround Left |
| : 0.0dB |
|
Subwoofer |
| : 0.0dB |
|
Return |
|
|
|
: Up / Down | : Change | Enter : | Exit : Exit |
AUTO SETUP (performed by Audyssey MultEQ) automatically measures the acoustical problems in the listening environment and optimizes settings to create the best audio experience for your listening environment.
Audyssey MultEQ removes frequency response anomalies caused by the interaction of sound from loudspeakers within the room. This results in the playback of sound as it was intended, without coloration, not just in one seat, but over a large listening area.
Audyssey MultEQ measures up to 6 listening positions in the room, detects the presence of each speaker, and automatically calculates the speaker size, channel level, distance, and optimal crossover frequency settings.
To set up the speaker system (i.e., adjusting speaker distance, etc.) without using the AUTO SETUP feature, see “MANUAL SETUP” on page 31 of the manual.
BASIC | CONNECTIONS |
BASIC | OPERATION |
ADVANCED | CONNECTIONS |
SETUP | |
ADVANCED | OPERATION |
TROUBLESHOOTING | |
OTHERS |
27