FUNCTIONS | NAMES AND |
CONNECTIONS | BASIC |
OPERATION | BASIC |
CONNECTIONS | ADVANCED |
ENGLISH
NAMES AND FUNCTION
8/NIGHT button
Pressing this button prevents the Dolby Digital signal from playback at a loud voice.
When this button is pressed, the “NIGHT” indicator is illuminated.
9/D.EQ/VOL buton
This button is used to select Audyssey Dynamic EQ/Dynamic Volume modes.
0/CH SEL button
This button is used to call up CH LEVEL ADJUST and adjust speaker levels or 7.1 ch input level.
+10/V.OFF button
This button is used to turn off the video signal.
¤1M (MACRO) button (SR6004)
This button is used to program Macros. Pressing this button switches between Normal mode and Macro mode.
HT-EQ button (SR5004)
This button is used to turn on or off HT (Home
¤4DISPLAY button
(When a mode other than USB is selected)
This button is used to selects the display mode for the front display of the unit.
(When USB mode is selected)
This button is used to select the previous page.
¤5INPUT 3 button
This button is for
INPUT 4 button
This button is for
¤6SETUP/MODE button
This button is used to setup for DVD and other device.
(When USB mode is selected)
This buttong is used to switch between direct/ remote mode during iPod opetation.
¤8ATT button
When the input signal is too high and the voice distorts even by throttling the unit VOLUME control, turn on this function.
“ATT” is indicated when this function is activated. The input level reduced. Attenuator is invalid for the output signal of “REC OUT”.
Note
This function is unavailable while the digital input is selected.
¤9A/D button
This button is used to switch between the analog and digital inputs.
‹0HDMI button (SR6004)
This button is used to select HDMI OUTPUT 1 or 2.
‹1SET button
This button is used to enter learn mode and preset
SR6004
‹4 ‹5 ‹6 ‹7
‹4LEARN indicator
This indicator is displayed when the remote controller is in the LEARN mode.
‹5MACRO indicator
This is displayed when a macro program is selected by the remote controller.
‹6Information indicator
Information about the sources and modes are shown on the LCD.
SETUP |
ADVANCED OPERATION |
TROUBLESHOOTING |
OTHERS |
¤2MENU button
(When AMP mode is selected)
This button is used to call up the SETUP MAIN MENU of the unit.
(When USB mode is selected)
Pressing this button during iPod operation moves you to
¤3TOP button
(When AMP mode is selected)
Pressing this button during setup returns you to the top screen of the setup main menu.
(When USB mode is selected)
Pressing this button displays the
¤7SOURCE button
These buttons are used to switch the source of your A/V Receiver. Each time a source button is pressed, the remote controller changes to the source which was pressed.
This remote controller can control 12 types of equipment. To change the A/V Receiver source, press this button twice within two seconds. The signal is sent when it is pressed the second time.
Notes
•Select the AMP as the source to use this remote controller with the unit.
•In the case of SR5004, the USB button cannot be used.
mode.
‹2I / SOURCE ON/OFF button
This button is used to turn a specific source (such as a DVD player) on or off independently from the rest of the system.
‹3Infrared transmitter and learning sensor
This transmitter emits infrared light. Press the buttons while pointing the transmitter towards the infrared receiver window of the unit or other AV equipment. Be sure to also point towards other remote controllers when using the learning function.
‹7 indicator
This indicator is displayed when the remote controller is transmitting a signal.
SR5004
‹8SEND indicator
Indicates when the remote controller is transmitting a signal.
‹9LEARN indicator
Indicates when the remote controller is in the LEARN mode.
8
